Submersible oil heater

SUBMERSIBLE OIL HEATER
Norske Backer’s submersible oil heater is intended for heating hydraulic oil to reduce wear and tear on the system.
The heating also reduces some water content in the oil. Of course, it also works for other liquids. It is easy to use in existing equipment, as no permanent installation is required. It is easily attached with integration magnets to the bottom of e.g. the idea.
An additional advantage is that you do not need to empty the tank, weld or clean before use.
Technical data
Material |
Stainless steel EN 1.4301/SS 2333 |
Connection |
Electrical connection 3×1.0 mm², 4 meter cable |
Voltage |
standard: 230 V, 24 V or per customer spec. |
Hysteresis |
11°C or per customer spec. |
Weight |
1.4 – 3.1kg |
Assembly |
No attachment device needed, attatched with integrated magnets at the bottom of the container. |
Surface load |
0.9W/cm² |
Safety |
CE marked per LVD. 2006/95/CE |
Others |
Heater complete with thermostat. Should be at least 3 cm below surface during use. Not to be used with fluids that have a flame temperature below 190°C |
Power W |
Voltage V |
Cutting temp. |
Dimension LxWxdia. mm |
Art.no. |
250 |
230 |
40°C |
225x74x67 |
6150 432 301 |
500 |
230 |
40°C |
325x74x67 |
6150 432 302 |
1000 |
230 |
40°C |
525x74x67 |
6150 432 303 |
250 |
230 |
20°C |
225x74x67 |
6150 432 304 |
500 |
230 |
20°C |
325x74x67 |
6150 432 305 |
1000 |
230 |
20°C |
525x74x67 |
6150 432 306 |
250 |
24 |
20°C |
225x74x67 |
6150 432 307 |
250 |
24 |
40°C |
225x74x67 |
6150 432 308 |
Benefits
- Integrated temperature regulation
- High voltage tolerance