ACR3 Hot Bonder

• Controls both heat and vacuum - ideal solution for localized, on-site curing of composites, metal bonding and processing applications "outside autoclave/oven".
• Intuitive graphical touchscreen interface that is easy to program and use.
• Compact size allows users to easily transport hot gluing from job to job.
• Fully self-contained and portable with built-in vacuum pump.
• Secure - multiple levels of password protection.
• Quickly transfer your applications from one gluer to another.
• Easy data transfer and analysis after curing - files can be easily transferred with
• USB drive and opens with spreadsheet and word processing applications, including Microsoft® Excel® and Word®.
• Robust - hot gluer is packed in an extra durable, impact resistant hard case.
• Multilingual support including English, German, Russian and Chinese (Mandarin). More languages are available on request.
• Easily update your hot gluer with the latest FREE software
• 3 year warranty

Product highlights:

• Full-color touchscreen interface
• Dual vacuum system - built-in electric pump and vacuum venturi for each zone
• Single or double zone
• 30 amps output per heating zone
• 10 thermocouple sensors per zone
• Audible and visual alarms for high and low temperature/vacuum limits
• Data logger digitally or via built-in printers
• Fast and easy data transfer with USB drive
• Includes everything you need

In general

• Display: 213 mm full-color touchscreen display
• Temperature control range: Up to 760 °C
• Temperature display units: °F or °C
• Sensor input: Type-J thermocouples with mini-contacts - 10 inputs per zone
• Accuracy: ±1,67 °C
• Temperature measurement source: Selection of average of all selected thermocouples (TCs), high TC, low TC or one selected TC
• Dimensions (closed): Heat binding unit: 559 x 457 x 254 mm; Accessory case: 483 x 381 x 178 mm
• Weight (heat binding unit): Single zone: 18 kg; Double zone: 22 kg
• Alarms: Audio and visual alarms for high and low temperature/vacuum limits
• Data storage: Stores up to 30 programs and the last 12 cures on the device
• Data transfer: Via USB port - USB flash drive included
• Data logging: Logs digitally or via built-in printer: prints and records real-time status of curing, including program parameters
• Data logging intervals: 1 to 99 minutes
• Security: Multiple levels of password protection

Electricity

• Input voltage: 100-130 VAC, 200-240 VAC
• Maximum ampere load per zone: 30 amps
• Frequency: 50-60 Hz
• Earth fault protection: Protected with input residual current device
• Voltage fluctuations in the mains: up to ±10 % of nominal voltage
• Transient overvoltages: Usually found on a Category II power source: e.g. a lighting circuit. Power cord: 3 m long with optional plug (1 per zone).
• Output cord for heater: 1.5 m long with plug compatible with Norske Backer composite curing blankets with 'C' plug. - Other heater output leads are available on request.

vacuum

• Vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone
• Pressure: 28 inHg (711 mmHg)
• Flow rate: 5.7 scfm (vacuum venturi); 0.9 scfm (electric vacuum pump)
• Vacuum units: Programmable to inHg or mmHg
• Vacuum adjustment: Possibility to manually adjust the pressure for each zone

Environment

• Location: Intended for use in dry environments. Do not expose to wet spray.
• Height above sea level: up to 2000 m
• Storage temperature range: -20 to 60 °C
• Operating temperature range: 5 to 40 °C
• Maximum relative humidity: 80 % for temperatures up to 31°C, decreasing linearly to 50 % relative to humidity at 40°C
• Degree of contamination: 2 - normally only non-conductive contamination occurs, but a temporary conductivity caused by condensation is to be expected.