ACR3 Hot Bonder Kit

ACR 3 kit for heat binding with heating elements includes:

• ACR®3 heat binding unit
• One 10″ x 10″ (254 x 254 mm) SR composite heated blanket per zone
• One 12″ x 12″ (305 x 305 mm) SR composite heated blanket per zone
• One 16″ x 16″ (406 x 406 mm) SR composite heated blanket per zone
• 10 ft (3 m) vacuum hoses (2 per zone)
• 10 ft (3 m) input power cord (1 per zone)
• 5 ft (1.5 m) heater output power cord (1 per zone)
• USB flash drive
• J-type thermocouples (10 per zone)
• Standard connector adapters for thermocouple connectors (10 per zone)
• Vacuum bag grommets (2 per zone)
• Extra printer ribbon and paper (1 per zone)
• DVD training video

Perform curing faster and better

• Single or double zone
• 8.4″ (213 mm) full-color touchscreen display
• Double vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone
• Universal voltage: 100-130 VAC, 200-240 VAC
• 30 amps output per heating zone
• 10 thermocouple sensors per zone
• Accepts J-type thermocouples
• Includes everything you need - training DVD

Easy-to-use software on a full-color HD touchscreen

• Fast 3-step programming: Stores up to 30 programs on hot binding unit
• Easy-to-understand menu options
• Quick and easy data entry: Uses simple drop-down menus and a familiar QWERTY keyboard interface
• Secure: Multiple levels of password protection
• Can be upgraded

• Multi-tasking: Perform multiple operations at the same time
• Retains history of the last 12 hardenings
• Customized analysis after curing: Data logging intervals 1 to 99 minutes
• Multi-language support: English, German, Russian, Chinese (Mandarin)
• Transfer and archive data history after curing to your PC
• Analyze your data instantly in spreadsheet and word processing applications, including Microsoft® Excel® and Word®
• Transfer your programs quickly from one farmer to another
• Easily update your hot bonder with the latest software version for FREE.

Quick and easy data transfer with USB drive (USB flash drive included)

• Transfer and archive data history after curing to your PC
• Analyze your data instantly in spreadsheet and word processing applications, including Microsoft® Excel® and Word®
• Transfer your programs quickly from one farmer to another
• Easily update your hot bonder with the latest software version for FREE.

Specifications

In general

• Single or double zone
• 8.4″ (213 mm) touchscreen with user-friendly interface
• USB port for data transfer (USB flash drive included)
• Input with RCD
• Audio and visual alarms for high and low temperatures/vacuum limits
• Data logger digitally or via built-in printer: prints and records curing status in real time, including program parameters

Electricity

• Universal input voltage: 100-130 VAC, 200-240 VAC
• Mains voltage fluctuations of up to ±10 % of nominal voltage
• Transient overvoltages typically found on a Category II power source: e.g. a lighting circuit
• Frequency: 50-60 Hz
• Maximum 30 amps per zone
• Output wire connector: NEMA L15-30R

vacuum

Double vacuum system: Built-in electric vacuum pump and vacuum venturi for each zone
Press: 28" Hg (13.8 PSI)
Possibility to manually adjust the pressure for each zone

Temperature control

• Cures up to 760 °C
• 10 inputs for thermocouple sensors per zone
• Accepts J-type thermocouple connectors
• Accuracy: ±1,67 °C
• Monitors all thermocouples for alarms

Environment

• Intended for use in dry environments. Do not expose to wet spray.
• Altitude up to 2000 m (6562 ft)
• Storage temperature range: -20 °C to 60 °C (-4 °F to 140 °F)
• Operating temperature range: 5 °C to 40 °C (41 °F to 104 °F)
• Maximum relative humidity: 80 % for temperatures up to 31°C (88°F), decreasing linearly to 50 % relative to humidity at 40°C (104°F)
• Contamination level 2 (normally only non-conductive contamination occurs, but a temporary conductivity caused by condensation must be expected)