EN 
NO 
Expertise
Our heating products offer high added value, and when combined with metering and control devices, you get complete, intelligent solutions. Tell us about your ideas or challenges and we'll help you find the optimal solution for you. In addition to answering your questions, our engineers can take care of the entire product development and testing process using advanced technical tools and laboratories. With our extensive experience, expertise, quality and service, you are guaranteed success. Our goal is not just to be a supplier, we want to be your partner. Together we make it happen!
Sustainability in every step.
Step by step with Norske Backer
Quality, environment and sustainability
Throughout our organisation, we strive for a continuous and comprehensive approach to the requirements and trends that accompany environmental challenges.
Energy efficiency and electrification are a recurring theme in virtually all industries and in society in general. This means that our products are increasingly supplementing and replacing previous solutions.
Renewable electric power is increasingly replacing fossil fuels as the power source for heating and movement.
Norwegian Backer's solutions and products for electric heating are consequently gaining ever larger markets, new industries and more application areas to operate in.
Idea
In our experience, existing and potential new customers approach us with ideas they want to develop.
Norske Backer's expertise is sought after, whether it concerns customers' individual projects or processes in long-term collaboration and development projects.
We're happy to share our experience to ensure customers get a product that best matches what they want.
The earlier we get involved in the planning of a project, the better we can understand the desired mode of operation, define basic operating parameters and take into account the environment in which the product will operate. component and material selection, energy consumption, temperature control and compliance with relevant laws, regulations and standards.
Correct planning, calculation, construction and production, provides the best possible cost-effective product that ensures a good lifespan, quality.
It is unsustainable to produce something that must be replaced after a short time, or discarded, because of errors or insufficient information was the basis for the construction.
We have the experience and knowledge you need!
Specification
When you enter into a collaboration with Norske Backer, we want you to feel confident that we are doing our best so that you end up with the best possible product in relation to the area of use in which it will operate.
There are a number of things that must be clarified early in the planning phase so that the specifications can be optimized as closely as possible to the customer's wishes.
In collaboration with the customer, we must determine the characteristics of the medium to be heated. Air, gases, liquids or solids.
The ambient environment and temperature conditions must also be clarified, and a decision must be made as to whether there are extraordinary requirements in relation to laws, regulations and standards.
Development
Norske Backer is part of a group with over 70 years of experience from the development, innovation and production of electric heating solutions.
We therefore believe we have very good knowledge of such products - we are constantly developing, and we are qualified to give advice about what will work for different applications. Our customers' challenges and changing trends in the market are largely what drive our development going forward.
Our ambitions are therefore to constantly develop in a way where, with the help of technology and research, we can optimize the energy efficiency, the area of use, the safety, and thus the sustainability of our products.
That's how you succeed!
Testing
Various test facilities are used in our research and product development.
These can be simulations in software, physical tests - both in our own factory, and in laboratories we have access to through the group.
In addition to our own product development, it is possible to use these facilities and testing opportunities in projects together with customers when necessary.
A selection of our products has been tested, approved and certified according to current directives and standards with external suppliers and certification bodies. Such as Ex-certified electric heating products for use in areas with a risk of explosion, e.g.
Testing, testing and analysis of electric heating products before they are put into production will ensure an energy-efficient product that best matches the customer's needs, authority requirements, and the desire for a sustainable quality product with a long lifespan.
PERFORMANCE AND SPECIFICATIONS
- Internal tests
- Temperature measurements and
- logging
- Pressure tests
- Simpler penetrant tests
- Thermography
- Refrigeration chamber (-25 °C)
- Moisture chamber
- Wind tunnel
- Noise tests
- Corrosion tests (long-term
- exposure)
- Electrical tests up to 24
- KV AC
- Resistance and insulation resistance tests
- Tests carried out externally and project-based according to agreements with the customer
DESIGN
- Pro Engineer CREO 3D modeling program
- AutoCAD software for drawing and construction
- ElproCAD software for electrical wiring diagrams
- Mechanica software for thermal and mechanical analyses
- Flow EFD software for flow analysis and thermals
- VVD (Visual Vessel Design)
- X-ray equipment
- Various calculation and documentation programs
TREDJEPART TESTING, GODKJENNING og SERTIFISERING
THIRD PARTY TESTING, APPROVAL and CERTIFICATION
We cooperate with e.g. with DNV, NEMKO, VDE, KIWA and UL
Solution
Approval
When we have presented a solution that we believe meets the customer's needs, and the requirement specifications comply with laws, directives and standards - the customer approves our proposal and further preparations towards production can continue.
Production
Norske Backer is part of a group with over 30 production facilities on four continents.
The global presence makes us and our products flexible in terms of adaptation and optimization in an international market spectrum.
We strive for continuous improvements in production efficiency, we have implemented LEAN measures and we have an actively present quality policy.
Our factory in Kongsvinger has good production capacity and an organization where we have competent employees with great adaptability. We also have close and good cooperation with our component and material suppliers. This contributes to reduced lead times, fast production and short delivery times of Norwegian-made quality products from our factory, and out to customers and end producers.
Shipping
Norske Backer offers a range of logistics solutions and has a flexible and customer-oriented attitude, which enables us to live up to our customers' demands and needs. When it comes to contracts and agreements, we refer to and follow Incoterms 2010. We can also offer customized solutions for packaging and delivery, to make it easier for our customers and impact the environment as little as possible. We can even offer storage facilities if needed.
We take your success seriously!
Throughout our organisation, we strive for a continuous and comprehensive approach to the requirements and trends that accompany environmental challenges.
Energy efficiency and electrification are a recurring theme in virtually all industries and in society in general. This means that our products are increasingly supplementing and replacing previous solutions.
Renewable electric power is increasingly replacing fossil fuels as the power source for heating and movement.
Norwegian Backer's solutions and products for electric heating are consequently gaining ever larger markets, new industries and more application areas to operate in.
In our experience, existing and potential new customers approach us with ideas they want to develop.
Norske Backer's expertise is sought after, whether it concerns customers' individual projects or processes in long-term collaboration and development projects.
We're happy to share our experience to ensure customers get a product that best matches what they want.
The earlier we get involved in the planning of a project, the better we can understand the desired mode of operation, define basic operating parameters and take into account the environment in which the product will operate. component and material selection, energy consumption, temperature control and compliance with relevant laws, regulations and standards.
Correct planning, calculation, construction and production, provides the best possible cost-effective product that ensures a good lifespan, quality.
It is unsustainable to produce something that must be replaced after a short time, or discarded, because of errors or insufficient information was the basis for the construction.
We have the experience and knowledge you need!
When you enter into a collaboration with Norske Backer, we want you to feel confident that we are doing our best so that you end up with the best possible product in relation to the area of use in which it will operate.
There are a number of things that must be clarified early in the planning phase so that the specifications can be optimized as closely as possible to the customer's wishes.
In collaboration with the customer, we must determine the characteristics of the medium to be heated. Air, gases, liquids or solids.
The ambient environment and temperature conditions must also be clarified, and a decision must be made as to whether there are extraordinary requirements in relation to laws, regulations and standards.
Norske Backer is part of a group with over 70 years of experience from the development, innovation and production of electric heating solutions.
We therefore believe we have very good knowledge of such products - we are constantly developing, and we are qualified to give advice about what will work for different applications. Our customers' challenges and changing trends in the market are largely what drive our development going forward.
Our ambitions are therefore to constantly develop in a way where, with the help of technology and research, we can optimize the energy efficiency, the area of use, the safety, and thus the sustainability of our products.
That's how you succeed!
Various test facilities are used in our research and product development.
These can be simulations in software, physical tests - both in our own factory, and in laboratories we have access to through the group.
In addition to our own product development, it is possible to use these facilities and testing opportunities in projects together with customers when necessary.
A selection of our products has been tested, approved and certified according to current directives and standards with external suppliers and certification bodies. Such as Ex-certified electric heating products for use in areas with a risk of explosion, e.g.
Testing, testing and analysis of electric heating products before they are put into production will ensure an energy-efficient product that best matches the customer's needs, authority requirements, and the desire for a sustainable quality product with a long lifespan.
- Internal tests
- Temperaturmålinger og loggføring
- Pressure tests
- Simpler penetrant tests
- Thermography
- Refrigeration chamber (-25 °C)
- Moisture chamber
- Wind tunnel
- Noise tests
- Korrosjonstester (langvarig eksponering)
- Elektriske tester opptil 24 KV AC
- Resistance and insulation resistance tests
Tests carried out externally and project-based according to agreements with the customer
DESIGN
- Pro Engineer CREO 3D modeling program
- AutoCAD software for drawing and construction
- ElproCAD software for electrical wiring diagrams
- Mechanica software for thermal and mechanical analyses
- Flow EFD software for flow analysis and thermals
- VVD (Visual Vessel Design)
- X-ray equipment
Various calculation and documentation programs
TREDJEPART TESTING, GODKJENNING og SERTIFISERING
THIRD PARTY TESTING, APPROVAL and CERTIFICATION
We cooperate with e.g. with DNV, NEMKO, VDE, KIWA and UL
Ideer, spesifikasjoner, forskning, utvikling og tester – alt i én løsning!
When we have presented a solution that we believe meets the customer's needs, and the requirement specifications comply with laws, directives and standards - the customer approves our proposal and further preparations towards production can continue.
Norske Backer is part of a group with over 30 production facilities on four continents.
The global presence makes us and our products flexible in terms of adaptation and optimization in an international market spectrum.
We strive for continuous improvements in production efficiency, we have implemented LEAN measures and we have an actively present quality policy.
Our factory in Kongsvinger has good production capacity and an organization where we have competent employees with great adaptability. We also have close and good cooperation with our component and material suppliers. This contributes to reduced lead times, fast production and short delivery times of Norwegian-made quality products from our factory, and out to customers and end producers.
Norske Backer offers a range of logistics solutions and has a flexible and customer-oriented attitude, which enables us to live up to our customers' demands and needs. When it comes to contracts and agreements, we refer to and follow Incoterms 2010. We can also offer customized solutions for packaging and delivery, to make it easier for our customers and impact the environment as little as possible. We can even offer storage facilities if needed.
We take your success seriously!