We’re taking an Easter break starting Friday and will be back on Tuesday, April 22. With that, we wish you a very Happy Easter!

+47 62 82 88 28 | marked@norskebacker.no |

Submersible oil heater

With a submersible oil heater from Norske Backer, you get a handy and efficient way to heat hydraulic oil and other types of fluids. By preheating the oil, it helps reduce wear on your machinery, and it also helps reduce the amount of water in the oil. Since it is submersible, it is easy to use in the equipment you already have, without the need to mount it permanently.

Applications:

Although primarily intended for hydraulic oil, you can also use this heater for many other liquids. It is suitable for:

Hydraulic systems
Gear boxes
Lubricating oil tanks
Other tanks with liquid that need heating

I would like more information
Please leave your contact information in the form below, and we will get in touch with you!

Advantages of this heater:

Less wear:
When the oil is warm, hydraulic systems and other machinery do not wear out as quickly.
Less water in the oil:
The heating helps to remove the water from the oil, which is important for the oil to lubricate well.
Easy to use:
You just put it in the tank - it has magnets in the bottom that hold it in place. You don't have to manage with a fixed installation.
Can be used for many things:
It works for several different types of liquid.
Avoid spills and messes:
You don't have to empty the tank, weld or wash before you use it.

A little about the technology:

Made of: Stainless steel EN 1.4301/SS 2333
Voltage: 230 Volt, 250W also available in 24V.
Power: 250 Watt, 500 Watt, and 1000 Watt
Cable: 3x1.0 mm², 4 meters long
Size: Length 225, 325 or 525mm. x74x67 mm
Weight: From 1.4 kg to 3.1 kg
Surface load: 0.9 Watt per square centimeter
Temperature control: Has a built-in thermostat of either 20°C or 40°C
Safe to use: CE marked according to the rules (2006/95/CE – low voltage directive)

Important to remember:
The heater must be at least 3 cm below the liquid surface when it is running. The liquid must withstand at least 190°C before it ignites.

Norske Backer – We know heat!
Norske Backer has been making good heating solutions that people can trust for a long time. Our submersible oil heaters are made to withstand heavy use, both in industry and other places where it is needed. Contact us today and we will find the best solution for you.

Technical data

Material	Stainless steel EN 1.4301/SS 2333
Dimension	Electrical connection 3×1.0 mm², 4 meter cable
Connection	standard: 230 V, 24 V or per customer spec.
Øvrig	Annen effekt/spenning kan fås på forespørsel
Voltage	230 V
Hysteresis	11°C or per customer spec.
Weight	1,4 kg – 3,1 kg
Assembly	No attachment device needed, attatched with integrated magnets at the bottom of the container.
Surface loading	0,9W/cm²
Safety	CE marked per LVD. 2006/95/CE
Annet	Heater complete with thermostat. Should be at least 3 cm below surface during use. Not to be used with fluids that have a flame temperature below 190°C

Specifications

Effect (W)	Voltage V	Cutting temp.	Dimension LxWxdia. mm	Art.nr.
250	230	40°C	225x74x67	6150 432 301
500	230	40°C	325x74x67	6150 432 302
1000	230	40°C	525x74x67	6150 432 303
250	230	20°C	225x74x67	6150 432 304
500	230	20°C	325x74x67	6150 432 305
1000	230	20°C	525x74x67	6150 432 306
250	24	20°C	225x74x67	6150 432 307
250	24	40°C	225x74x67	6150 432 308